+44 (0)24 7671 8970
More publications     •     Advertise with us     •     Contact us
 
Loading...
{megaLeaderboard}
{normalLeaderboard}
News Article

Early disease detection in body fluids with photonic biosensors

News

Standard medical procedures are often time-consuming and generally do not take into account the individual characteristics of patients. This can have a negative impact on the success of treatment and impair quality of life. To solve this problem, a Fraunhofer research team from Fraunhofer IPMS, Fraunhofer IZI and Fraunhofer IOF is developing disposable biosensors that deliver rapid results and have extensive multiplexing capabilities. These biosensors enable the early detection of diseases and have the potential to significantly improve healthcare.

The detection method is based on special bioassays developed by Fraunhofer IZI, in which antigen molecules bind specifically to sensor surfaces that have been functionalized with capture molecules. The binding of the molecules to the sensor surface leads to a resonance wavelength shift in the transmission spectra of the biosensor chip. "Thanks to their high sensitivity, these biosensors can precisely detect biological molecules in liquids so that they can be used for the early detection of diseases using body fluids," explains Dr. Florenta Costache, project manager at Fraunhofer IPMS.

The biosensors consist of specially developed, scalable on-chip multichannel micro-ring resonator architectures with currently up to 7 sensors designed for a wavelength of 1550 nm. They are manufactured on a silicon nitride waveguide platform on 200 mm silicon wafers in the CMOS-compatible process line in one of Fraunhofer IPMS's state-of-the-art clean room facilities. To further increase sensitivity, additional sensor designs are currently being developed that operate in the visible range and are based on micro-ring resonators and Mach-Zehnder interferometers in various unique combinations. This results in cost-efficient, scalable sensors with customized design, high precision and reliability.

Costache adds: "We have also developed and successfully implemented a regeneration process to restore the functional surface of the sensor. This allows the sensor to be recycled and used several times. This saves costs and facilitates mobile use under field conditions."

Demonstrator for the detection of biomarkers in neurodegenerative and oncological diseases

The research team has already successfully developed a portable demonstrator based on a multi-channel silicon nitride micro-ring resonator biosensor system that allows for easy chip exchange by implementing special solutions for light coupling and detection. This system enables the multiplex detection of specific miRNA biomarkers associated with neurodegenerative and oncological diseases. The capture molecules immobilized on the sensor surface for the detection of these biomarkers are DNA-based. The developed sensors and the integrated system are versatile and can be adapted for the detection of nucleic acids, various disease-associated biomarkers and pathogens in different fluids.

Early disease detection in body fluids with photonic biosensors
University College London (UCL) HyperMile Racing Team Unveils Breakthrough Powertrain Innovation
ASMPT Showcase CMAT-S: high-speed lens assembly and alignment in one at AutoSens
Melexis introduces MLX90427 position sensing for steer-by-wire
More accurate force measurement
Ultra-flat Baumer inductive sensor is product of the year
OMNIVISION Announces Automotive Image Sensor with TheiaCel™ Technology Now Compatible with NVIDIA Omniverse for Autonomous Driving Development
New standards in the assessment of water quality: Fraunhofer IPMS develops new multi-sensor system for water analysis
Imec demonstrates readiness of the High-NA EUV patterning ecosystem
Phlux’s 12X more sensitive IR sensors transform LiDAR, rangefinder, and optical fibre test performance
Melexis Triphibian™ revolutionizes the world of MEMS pressure sensors
FRAMOS Launches - FSM:GO The Next Generation Embedded Sensor Module
Microchip Launches 10 Multi-Channel Remote Temperature Sensors
Praxis air quality sensors selected for 41 locations across Greater Manchester
XENSIV™ stray field robust linear TMR sensor enables high-precision length measurements in industrial and consumer applications
OMNIVISION Announces First 3MP SoC Image Sensor for LED Flicker-Free, High Dynamic Range Automotive Cameras
OMNIVISION Announces High-Performance OX01J Image Sensor for Surround- and Rear-View Cameras
Murata announces the SCH16T-K01, a next generation 6DoF inertial sensor
TI debuts new automotive chips at CES
New Baumer sensor detects point levels despite films and adhesion
Renesas Introduces 32-bit RX MCU with High-Speed, High-Precision Analog Front End for High-End Industrial Sensor Systems
Baumer level sensor PLP70 wins AutomationsBest Award
Renesas Develops Cost-Effective, Highly Accurate and Robust Induction Motor Position Sensing Technology
onsemi Introduces Lowest Power Image Sensor Family for Smart Home and Office
New high-speed InGaAs area image sensor with a wider dynamic range, and increased speed and accuracy for plastic sorting and similar applications
Mouser Extends Motion and Positioning Range with New IMU, AHRS and Accelerometer Solutions
Quantum technologies: Bosch aims to use sensors to take a leading position
PNE AG continues to be successful in onshore wind power tenders
New functions added to soil sensors -Measurements available for synthetic culture soil such as rock wool and coconut peat
High-precision microsensor technology for a wide application range
Integrated Graphene doubles footprint to meet global demand and to scale up production
Food Research All Washed Up
×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
×
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • View all news 22645 more articles
Logo
×
Register - Step 1

You may choose to subscribe to the Sensor Solutions Magazine, the Sensor Solutions Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: