+44 (0)24 7671 8970
More publications     •     Advertise with us     •     Contact us
News Article

Imec demonstrates readiness of the High-NA EUV patterning ecosystem


Advances in processes, masks and metrology will enable to fully benefit from the resolution gain offered by the first ASML 0.55NA EUV scanner.

This week, at the 2024 Advanced Lithography + Patterning Conference, imec will present the progress made in EUV processes, masks, and metrology prepared for enabling high-numerical aperture (High-NA) extreme ultraviolet (EUV) lithography. Key achievements are reported on resist and underlayer development, mask enhancement, optical proximity correction (OPC) development, at-resolution field stitching, reduction of stochastic failures, and improved metrology and inspection. With these results, imec demonstrates readiness for transferring the EUV processes into the joint imec-ASML High-NA EUV Lab, built around the first prototype High-NA EUV scanner.

Steven Scheer, senior vice president of Advanced Patterning, Process and Materials at imec: “The first High-NA EUV scanner (TWINSCAN EXE:5000) has been assembled by ASML and the first wafers will be exposed soon. In the next few months, the joint imec-ASML High-NA EUV Lab will be operational, and access will be provided to the High-NA customers. The High-NA EUV lab, with the installed equipment and processes, enables an early start of High-NA EUV learning for the customers before tools are operational in their fabs. It has been imec’s role, in tight collaboration with ASML and our extended supplier network, to ensure timely availability of advanced resist materials, photomasks, metrology techniques, (anamorphic) imaging strategies, and patterning techniques. Readiness of these processes for High-NA enablement is shown in more than 25 papers presented at the 2024 SPIE Adv Litho & Patt Conference.”

Field stitching is a key enabler in High-NA: field stitching is needed because of the anamorphic lens (i.e., a lens with different de-magnification in the x and y directions), resulting in field sizes of half of the conventional scanner field size. Imec will share the latest insights that enable at-resolution stitching based on work done with ASML and our mask shop partners on imec’s NXE:3400C scanner. At-resolution stitching will reduce the need for design changes to cope with the field size reduction.

On the material and process side, it is clear that metal-oxide resists (MORs) are still in the lead for metal line/space patterns. Imec will present the advancements of MOR in terms of EUV dose-to-yield reduction. The selection of the specific underlayer, optimization of the development process, choice of mask absorber, mask bias and mask tonality were leading to a more than 20% dose reduction for lines and spaces, without increased roughness or stochastic failures. Also, tip-to-tip dimensions were not negatively impacted by these dose reduction activities. The dose reduction work continues and is highly appreciated by our chip makers, since it leads to EUV cost reduction due to the higher scanner throughput.

An unexpected result was obtained by using MOR resists with a binary bright field mask for contact hole patterning. A 6% dose reduction with a 30% local CD uniformity (LCDU) improvement was achieved after pattern transfer when comparing to a positive tone chemically amplified resist (CAR) and a binary dark field mask transferred in the same stack. A remaining concern of bright field masks for contact holes is the mask quality and defectivity. This will need careful investigation to make MOR an option for contact holes. Until then, positive tone CAR resists with dark field masks will be the leading candidates for contact and via patterning in High-NA EUV.

High-NA also requires improvements in metrology and inspection, giving the higher resolution (by the high NA) and thinner films (by the reduced depth of focus (DOF)). Imec will present new results on e-beam and deep-UV (DUV) inspection, showing that new best-known methods (BKMs) are in place to find High-NA relevant stochastic patterning failures, such as hexagonal contact holes. In addition, several machine learning techniques (based on denoising SEM micrographs) will be proposed to facilitate the small defect inspection and classification.

Finally, imaging improvements through source-mask optimizations and anamorphic mask OPC (considering the need for stitching) will be presented by imec and partners.

Imec demonstrates readiness of the High-NA EUV patterning ecosystem
Phlux’s 12X more sensitive IR sensors transform LiDAR, rangefinder, and optical fibre test performance
Melexis Triphibian™ revolutionizes the world of MEMS pressure sensors
FRAMOS Launches - FSM:GO The Next Generation Embedded Sensor Module
Microchip Launches 10 Multi-Channel Remote Temperature Sensors
Praxis air quality sensors selected for 41 locations across Greater Manchester
XENSIV™ stray field robust linear TMR sensor enables high-precision length measurements in industrial and consumer applications
OMNIVISION Announces First 3MP SoC Image Sensor for LED Flicker-Free, High Dynamic Range Automotive Cameras
OMNIVISION Announces High-Performance OX01J Image Sensor for Surround- and Rear-View Cameras
Murata announces the SCH16T-K01, a next generation 6DoF inertial sensor
TI debuts new automotive chips at CES
New Baumer sensor detects point levels despite films and adhesion
Renesas Introduces 32-bit RX MCU with High-Speed, High-Precision Analog Front End for High-End Industrial Sensor Systems
Baumer level sensor PLP70 wins AutomationsBest Award
Renesas Develops Cost-Effective, Highly Accurate and Robust Induction Motor Position Sensing Technology
onsemi Introduces Lowest Power Image Sensor Family for Smart Home and Office
New high-speed InGaAs area image sensor with a wider dynamic range, and increased speed and accuracy for plastic sorting and similar applications
Mouser Extends Motion and Positioning Range with New IMU, AHRS and Accelerometer Solutions
Quantum technologies: Bosch aims to use sensors to take a leading position
PNE AG continues to be successful in onshore wind power tenders
New functions added to soil sensors -Measurements available for synthetic culture soil such as rock wool and coconut peat
High-precision microsensor technology for a wide application range
Integrated Graphene doubles footprint to meet global demand and to scale up production
Food Research All Washed Up
Renesas to Support Public Building Air Quality Standards in Environmental Sensors
POLYN Introduces VibroSense, Application-Specific Vibration Pre-Processing Chip Design
Superior Sensor Technology’s New Ventilator Pressure Sensor Solution Greatly Improves Patient-Ventilator Synchrony
Renesas Unveils Cloud-based System Development Tool to Dynamically Create IoT Software
Signs of price stability and improved availability
Brewer Science presents hybrid printed sensors
The all-seeing eyes of Industry 4.0
Imec demonstrates co-integration of high-quality SiN waveguide technology with silicon photonics platform
Search the news archive

To close this popup you can press escape or click the close icon.
Register - Step 1

You may choose to subscribe to the Sensor Solutions Magazine, the Sensor Solutions Newsletter, or both. You may also request additional information if required, before submitting your application.

Please subscribe me to:


You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: