Info
Info
News Article

Artificial Eye Has Perovskite Retina

News

Electrochemical Eye may offer sharper vision than a human eye with extra functions such as the ability to detect infrared radiation in darkness

An international team led by scientists at the Hong Kong University of Science and Technology (HKUST) has recently developed the world's first 3D artificial eye with capabilities better than existing bionic eyes and in some cases, even exceed those of the human eyes, bringing vision to humanoid robots and new hope to patients with visual impairment. The team collaborated with the University of California, Berkeley on the project and their findings were recently published in Nature.

Scientists have spent decades trying to replicate the structure and clarity of a biological eye, but vision provided by existing prosthetic eyes - largely in the form of spectacles attached with external cables, are still in poor resolution with 2D flat image sensors.

The HKUST Electrochemical Eye (EC-Eye) replicates the structure of a natural eye for the first time, and may offer sharper vision than a human eye in the future, with extra functions such as the ability to detect infrared radiation in darkness.

The key feature is a 3D artificial retina - made of an array of perovskite-based nanowire light sensors which mimic the photoreceptors in human retinas. Developed by Fan Zhiyong and Gu Leilei from the Department of Electronic and Computer Engineering at HKUST, the team connected the nanowire light sensors to a bundle of liquid-metal wires serving as nerves behind the man-made hemispherical retina during the experiment, and successfully replicated the visual signal transmission to reflect what the eye sees onto the computer screen.

In the future, those nanowire light sensors could be directly connected to the nerves of the visually impaired patients. Unlike in a human eye where bundles of optic nerve fibres (for signal transmission) need to route through the retina via a pore - from the front side of the retina to the backside (thus creating a blind spot in human vision) before reaching the brain; the light sensors that now scatters across the entire man-made retina could each feed signals through its own liquid-metal wire at the back, thereby eliminating the blind spot issue as they do not have to route through a single spot.

Apart from that, as nanowires have even higher density than photoreceptors in human retina, the artificial retina can thus receive more light signals and potentially attain a higher image resolution than human retina - if the back contacts to individual nanowires are made in the future. With different materials used to boost the sensors' sensitivity and spectral range, the artificial eye may also achieve other functions such as night vision.

"I have always been a big fan of science fiction, and I believe many technologies featured in stories such as those of intergalactic travel, will one day become reality. However, regardless of image resolution, angle of views or user-friendliness, the current bionic eyes are still of no match to their natural human counterpart. A new technology to address these problems is in urgent need, and it gives me a strong motivation to start this unconventional project," said Fan, whose team has spent nine years to complete the current study from idea inception.

"In the next step, we plan to further improve the performance, stability and biocompatibility of our device. For prosthesis application, we look forward to collaborating with medical research experts who have the relevant expertise on optometry and ocular prosthesis," Fan added.

The working principle of the artificial eye involves an electrochemical process which is adopted from a type of solar cell. In principle, each photo sensor on the artificial retina can serve as a nanoscale solar cell. With further modification, the EC-Eye can be a self-powered image sensor, so there is no need for external power source nor circuitry when used for ocular prosthesis, which will be much more user-friendly as compared with the current technology.

'A biomimetic eye with a hemispherical perovskite nanowire array retina' by Leilei Gu et al; Nature volume 581, 20 May 2020



2nd November 2020 - 10am GMT (Live event)
4th November 2020 – 10am CTT (Recorded)
6th November 2020 – 10am PST (Recorded)


Following on from the successful launch of the virtual AngelTech Online Summit in May 2020, we are delighted to announce AngelTech Live II, taking place on 2 November 2020. AngelTech will once again consist of our established events of CS International and PIC International.

The 2nd virtual summit will utilise an enhanced event engine, integrating presentations, digital sponsors booths and the networking tools into one portal – allowing for live chat between delegates, speakers and sponsors.

The event will take the form of three interactive sessions over 1 day and will be a must attend live summit consisting of:

  • Analyst talks
  • Industrial research
  • End user presentations
  • Dedicated breakout room for partner presentations

MORE INFO     REGISTER FOR FREE     WATCH OUR MAY EVENT ON-DEMAND
Allegro MicroSystems Acquires Voxtel, Inc. To Drive LiDAR Solutions For Advanced Automotive Safety Systems
DreamDrive, An Advanced Driver-Assistance System To Debut In The Lucid Air
Artificial Eye Has Perovskite Retina
Xperi And Tower Announce New License
World-leading Pharmaceutical Developer Turns To TorqSense
CSC Announces Two Magnetometer Projects
Stay Healthy With Touchless Technology – Introducing New 3D Time-of-flight Image Sensors
LiDAR Startup SOS LAB Closes A $8 Million Series A+ Round
Paragraf Partners With CERN To Demonstrate Unique Properties Of New Graphene Hall Effect Sensor
EV Group Brings Maskless Lithography To High Volume Manufacturing
Osram Launches Intelligent 3D Sensing Emitter Module
Sensata Technologies Appoints New General Manager For Aftermarket Business Unit
Ibeo And Ams Solid-State LiDAR Technology To Be Used By Great Wall Motors In Its Future L3 Autonomous Vehicles
ECanter SensorCollect Demonstrates Open Innovation Culture
To Make A Better Sensor, Just Add Noise
University Of Antwerp And Imec Launch Crowdscan
Bat-like Sensor Could Help Social Distancing As Lockdown Lifts
Spanish Spin-off Develops SWIR Sensors From Graphene And QDs
Using Photonics To Clean Waste Water
Yokogawa Introduces Improved Optical Sensor Modules
Joint Tech Efforts With Senova Create Covid-19 Point-of-care Rapid Antibody Test
RoboSense LiDAR Partnered With DT Mobile
Smart Profile Sensors For Simple, Efficient, Lower Cost Inline Testing And Control
2D Sensor Finds Subtleties In Magnetic Fields

Info
×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
×
Logo
×
Register - Step 1

You may choose to subscribe to the Sensor Solutions Magazine, the Sensor Solutions Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in:
 
X
Info
X
Info
{taasPodcastNotification}